Pioneer AVIC-S1 User Manual page 50

User's manual AVIC-S1
- 48 -
The map opens in S
uniqueness of this mode is that the address field appears in
the lower half of the display.
Your current location is marked by a red triangle. Above the
triangle you can see a crosshair.
2. Change the map section that is being displayed in such a way
that the point to which you want to navigate is visible on the
map.
You will find information about working with the map in
chapter "Working with the map" on page 65.
3. Touch briefly on the destination point.
The crosshair appears at the position you have touched. The
name of the street in which your destination is located then
appears in the address field. If you have touched on a point of
interest, the name of the point of interest appears.
EARCH FOR DESTINATION
mode. The
Entering a destination