Searching For Nearby Phones; Searching For A Specified Phone - Pioneer Super Tuner IIID AVIC-X710BT Operation Manual

Chapter
08 Using hands-free phoning

Searching for nearby phones

The system searches for available cellular
phones near the navigation system, displays
them in a list, and registers them for connec-
tion.
1 Activate the Bluetooth wireless tech-
nology on your cellular phone.
For some cellular phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your cellular phone.
Touch [Phone Settings] on the "Phone
2
Menu".
= For details, refer to Displaying the Phone
Menu on the previous page.
3 Touch [Connection].
4 Touch [Add Device], and then [Search
devices].
The system searches for cellular phones fea-
turing Bluetooth technology that are waiting
for the connection and displays them in the
list if the device has found.
p Up to 10 cellular phones will be listed in the
order that the cellular phone is found.
5 Wait until your cellular phone appears
in the list.
p If you cannot find the cellular phone you
want to connect, check that the cellular
phone is waiting for the Bluetooth wireless
technology connection.
6 Touch the cellular phone name you
want to register.
74
En
A message prompting you to enter a PIN code
appears.
Enter the PIN code "1111" using the cel-
7
lular phone.
When a connection is successfully estab-
lished, a connection complete message ap-
pears, the screen returns to the "Phone
Settings" menu by touching [OK].

Searching for a specified phone

If you cannot connect your phone using
[Search devices] and [Pair from the mobile
phone], try this method if your phone is found
in the list.
1 Activate the Bluetooth wireless tech-
nology on your cellular phone.
For some cellular phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your cellular phone.
Touch [Phone Settings] on the "Phone
2
Menu".
= For details, refer to Displaying the Phone
Menu on the previous page.
3 Touch [Connection].
4 Touch [Add Device], and then [Select
specific devices].