Pioneer Super Tuner IIID AVIC-X710BT Operation Manual page 180

Appendix
Appendix
The icon 9 is displayed, and op-
eration is not possible.
The picture stops (pauses) and
the navigation system cannot be
operated.
The picture is stretched, with in-
correct aspect ratio.
A parental lock message is dis-
played and DVD playback is not
possible.
Parental lock for DVD playback
cannot be canceled.
Playback is not with the audio
language and subtitle language
settings selected in [DVD
Setup].
The picture is extremely unclear/
distorted and dark during play-
back.
Cannot be operated.
Songs on iPod connected with
this system cannot be available
as voice commands or different
song or title from the one that
you said is recognized.
Problems with the phone screen
Symptom
Dialing is not possible because
the touch panel keys for dialing
are inactive.
180
En
The operation is not compatible
with the video configuration.
The reading of data is impossible
during disc playback.
The aspect setting is incorrect for
the display.
Parental lock is on.
The code number is incorrect.
The DVD playing does not feature
dialog or subtitles in the language
selected in [DVD Setup].
The disc features a signal to prohibit
copying. (Some discs may have
this.)
The iPod is frozen.
An error has occurred.
iPod content/data has been up-
dated, but the data on this system's
memory has not been updated yet.
(i.e., system has not cataloged new
iPod content), or cataloging was not
completed)
Cause
Your phone is out of range for ser-
vice.
The connection between the cellular
phone and the navigation system
cannot be established now.
This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
After touching g once, start playback once
more.
Select the appropriate setting for that image.
(Page 164, Page 104)
Turn parental lock off or change the level.
(Page 104)
Input the correct code number. (Page 104)
Switching to a selected language is not possi-
ble if the language selected in [DVD Setup]
is not recorded on the disc.
Since the navigation system is compatible
with the copy guard analogue copy protect
system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
"Acc off". Then start the engine again, and
turn the power to the navigation system back
on. If this does not solve the problem, press
the RESET button on the navigation system.
! Update the iPod software version.
If you update the iPod data, activate [VR Cat-
alog Mode] to catalog/transfer the music in-
formation to this system and synchronize the
music information for voice commands with
the data on iPod. (Page 165)
Action (Reference)
Retry after re-entering the range for service.
Perform the connection process.