Reading The Screen; Using The Touch Panel Keys - Pioneer Super Tuner IIID AVIC-X710BT Operation Manual

Chapter
18 Using the radio (FM)
You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
% Touch [FM] on the "AV Source" menu to
display the "FM" screen.
= For details concerning operations, refer to
Screen switching overview on page 34.

Reading the screen

1 2
5
6
7
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3 Preset number indicator
Shows what preset item has been selected.
4 Frequency indicator
5 LOCAL indicator
Shows when local seek tuning is on.
6 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
7 Signal level indicator
120
En
3 4

Using the touch panel keys

1 Recall equalizer curves
= For details, refer to Recalling equalizer
curves on page 160.
2 Display the "Function" menu
= For details, refer to Using the
"Function" menu on the next page.
3 Select a preset channel
[c] or [d] can be used to switch preset chan-
nels.
4 Perform manual tuning
To tune manually, touch [c] or [d] briefly. The
frequencies move up or down one step at a
time.
Perform seek tuning
To perform seek tuning, touch and hold [c] or
[d] for about one second and release. The
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
either [c] or [d] briefly.
p If you touch and hold [c] or [d], you
can skip broadcasting frequencies.
Seek tuning will start as soon as you re-
lease the keys.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Select an FM band
Touch [Band] repeatedly until the desired FM
band is displayed, FM1, FM2 or FM3.
p This function is convenient for preparing
different preset lists for each band.
6 Display the map screen
1 2
3
4
5
6