7-13 Changing the work holder
(1) Remove the work holder (No.1) by pressing it down from the engaged area with the pin (No.2) of the
clamp adapter.
(2) Prepare another work holder and securely engaged its U shaped motise (No.3) with the pin (No.2) of
the clamp adapter.
<1>:Adjusting knob
<1>
<2>:Air regulator
<2>
<2>
<3>
<1>
- 26 -
<1>: Work holder
<2>: Pin
<3>: U shaped mortise