Table of Contents
Advertisement
2. SPECIFICATIONS
Sewing area
Maximum sewing speed
Setting speed
Stitch length
Stitch type
Maximum number of needles
Storable sewing data item
Data memory
Needle bar stroke
Thread take up lever stroke
Class of needle
Wiper system
*2
Presser foot lift
*3
Presser foot stroke
Work holder lift
Hook
Bobbin case
Bobbin
Thread trimmer system
Lubrication system
Lubrication oil
X-Y drive system
Machine dimensions
Weight
Type of motor
Type of controller
Type of operation panel
Power
*1：Sewing speed may be limited by the operation or sewing condition.
Maximum sewing speed of factory default setting is set at 2,300rpm.
*2：Presser foot lift is the height of the presser foot after the sewing has stopped.
*3：Presser foot stroke is the up and down movement of the presser foot while sewing.
: X-direction (left/right) 250 mm, Y-direction (front / back) 160 mm
*1
: 2,800 rpm
: 10 speed levels in 200 rpm to 2,800 rpm
: 0.1 to 20.0 mm
: Single needle lock stitch
: 20,000 per pattern
: 900 patterns (internal memory)
: Internal memory, USB memory
: 40.0 mm
: 72.7 mm
: DPX17#18 (at standard installation)
: Back to front wiping system
: 15 mm (12 mm as factory default setting)
: In 4 mm to 10 mm (4 mm as factory default setting)
: 30 mm
: Large size rotating hook
: With non racing spring
: Large size steel bobbin
: Arc engagement with fixed knife and movable knife
: Replenishment with the oil braids from the oil tanks
: Pulley SF oil
: Stepping motor feedback control
Timing belt drive system
: 1,200 mm (W) ×1,068 mm (L) ×1,230 mm (H)
: Total 168.5 Kg
: XL-K756-20
: PLK-G-CU-20
: PLK-G-PAL
: In 200V to 240V single-phrase or three-phrase
The power in 110V to 120V or in 380V to 415V is compatible with
power unit (option).
- 2 -
Advertisement
Table of Contents
