Table of Contents
Advertisement
Symbols
Standby and power on.
Battery installation guide
Direct current
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
Appears while measurement is in
progress. It blinks when the pulse is
detected.
Irregular Heartbeat symbol (I.H.B.)
Appears when an irregular heartbeat is
detected. It may light when a very
slight vibration like shivering or shaking
is detected.
Previous measurements stored in
MEMORY.
FULL BATTERY
The battery power indicator during the
measurement.
LOW BATTERY
The indicator blinks when battery
power is low.
Unstable blood pressure due to
movement during the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
PUL DISPLAY ERROR
The pulse is not detected correctly.
Pairing or unpairing has not been
performed correctly.
Pairing in progress
Unpairing in progress
Pairing or unpairing complete
Systolic blood pressure in mmHg
SYS
Diastolic blood pressure in mmHg
DIA
Pulse per minute
PUL
Symbols
Function / Meaning
English 5
Recommended Action
Measurement is in
progress. Remain as still
as possible.
Replace all batteries with
new ones, when the
indicator blinks.
Try the measurement
again. Remain very still
during the measurement.
Fasten the cuff correctly,
and try the measurement
again.
Remove and re-insert the
batteries. Try pairing or
unpairing again.
Advertisement
Table of Contents
