Table of Contents
Advertisement
Available languages
Available languages
EnGLIsh
q
Do not probe with conductive objects.
r
Do not charge damaged battery packs.
s
Do not expose to water.
t
Have defective cords replaced immediately.
u
Charge only between 4 ˚C and 40 ˚C.
v
Only for indoor use.
x
Discard the battery pack with due care for
the environment.
y
Charge D
WALT battery packs only with designated
e
D
WALT chargers. Charging battery packs other than
e
the designated D
e
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
Battery Type
The following tools operate on a 54-volt battery pack: DCG460.
These battery packs may be used: DCB546, DCB547, DCB547G,
DCB548, DCB549. Refer to Technical Data for more information.
Package Contents
The package contains:
1 Angle grinder
1 Type 41/Type A Guard
1 Type 27/Type B Guard
1 Side handle
1 Disc spanner
1 Li-Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1, U1,
X1, Y1, Z1 models)
2 Li-Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2, T2, U2,
X2, Y2, Z2 models)
3 Li-Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3, T3, U3,
X3, Y3, Z3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
50
WALT batteries with a D
WALT
e
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
Always operate with two hands.
Do not use the guard for cut-off operations.
Electronic brake.
Date Code Position (Fig. E)
The date code
, which also includes the year of manufacture,
14
is printed onto the gear case.
Example:
2022 XX XX
Year and Week of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch
1
Lock-off lever
2
Spindle lock button
3
Spindle
4
Auxiliary handle
5
Unthreaded backing flange
6
(fixed to spindle)
Locking flange
7
Type 27/Type B guard 230 mm
8
Guard release lever
9
Battery pack
10
Battery release button
11
Main handle
12
Heavy load indicator LED
13
Intended Use
The DCG460 cordless angle grinder has been designed
for professional cutting, grinding, sanding and wire
brush applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This cordless angle grinder is a professional power tool.
Advertisement
Table of Contents
