Connecting The Monitor For Thunderbolt; Tm Daisy Chain Function - Dell UltraSharp 32 User Manual

Connecting the monitor for Thunderbolt

A PC is connected to two monitors in an initially OFF power state, and the PC system
power state is in sync with Monitor 1 power button. When you press the Monitor 1 or
PC power button, both the Monitor 1 and PC turns ON. Meanwhile the Monitor 2 will
remain OFF. You need to manually press the power button on Monitor 2 to turn it ON.
Similarly, a PC is connected to two monitors in an initially ON power state, and the
PC system power state is in sync with Monitor 1 power button. When you press the
Monitor 1 or PC power button, both the Monitor 1 and PC turns OFF. Meanwhile the
Monitor 2 will be in Standby mode. You need to manually press the power button on
Monitor 2 to turn it OFF.
Thunderbolt TM 4
upstream
Monitor 2
Thunderbolt TM 4
upstream
Going into Standby mode...
Monitor 2
daisy chain function
TM
Thunderbolt TM 4 Thunderbolt TM 4
downstream upstream
Monitor 1
Thunderbolt TM 4 Thunderbolt TM 4
downstream upstream
Monitor 1
Setting up the monitor | 57