Connecting Your Monitor; Connecting The Displayport (Dp To Dp) Cable - Dell P2225H User Manual

Connecting your monitor

WARNING: Before you begin any of the procedures in this section,
follow the Safety
NOTE: Dell monitors are designed to work optimally with the Dell-
supplied cables inside the box. Dell does not guarantee the video quality
and performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The
appearance of the computer may vary.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the DisplayPort, HDMI, or VGA cable from your monitor to the
computer.
3. Connect the USB 3.2 Gen1 upstream port on the monitor and an appropriate
USB 3.2 Gen1 port on your computer with the supplied USB cable (see
and bottom view
4. Connect the USB peripherals to the USB 3.2 Gen1 downstream ports on the
monitor.
5. Plug the power cables for your computer and monitor into a nearby outlet.
6. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an
image, see Common

Connecting the DisplayPort (DP to DP) cable

instructions.
for details).
problems.
Setting up the monitor
Rear
│
53