Bosch WGG244M40 Instructions For Use And Assembly page 41

disturbance
Program starts
not.
The door cannot be
opened.
Detergent does not work
pumped out.
Cause and troubleshooting
Laundry is jammed in the door.
Open the door again.
1.
Remove jammed laundry.
2.
Close the door.
3.
To start the program, press Start / reload.
4th
is activated.
Continue the program by pressing fling or Pumping
▶
out choose and Start / reload to press.
→
"Continuing the program at Rinse Hold ", page 33
Temperature is too high.
Wait until the temperature has dropped.
▶
→ "Abort program ", page 32
▶
The water level is too high.
Start the program Pumping out.
▶
Power failure.
Open the door with the emergency release.
▶
→
"Emergency release ", page 47
The drain pipe or water drainage hose is blocked.
Clean the drain pipe and water drain hose.
▶
The drain pipe or water drainage hose is kinked or
pinched.
Make sure that the drain pipe and water drainage
▶
hose are not kinked or pinched.
The drain pump is blocked.
→
"Cleaning the drain pump ", page 35
▶
is activated.
Continue the program by pressing fling or Pumping
▶
out choose and Start / reload to press.
→
"Continuing the program at Rinse Hold ", page 33
The water drainage hose is connected too high.
Install the water drainage hose at a maximum
▶
height of 1 meter.
Pump cover is not assembled correctly.
Assemble the pump cover correctly.
▶
Detergent dosage is too high.
Troubleshooting de
41