Table of Contents
Advertisement
de
Before first use
6th Before the first
use
B. p repare the device for use.
6.1 Start the empty wash cycle
Your device was thoroughly checked
before it left the factory. To remove
any residual water, wash without
laundry for the first time.
Open the program selector Clean
1.
the drum put.
Close the door.
2.
Pull out the detergent drawer.
3.
Pour heavy-duty powder detergent into
4th
compartment II.
To avoid foam formation, only use
half the amount of detergent
recommended by the detergent
manufacturer for light soiling. Do
not use detergent for wool or mild
detergents.
Slide in the detergent drawer.
5.
To start the program, click on
6th
Start / reload to press.
a The display shows d
Program duration.
a The display shows n
end: "-0-".
20th
ie remaining
oh program
Start the first wash cycle or press
7th
the program selector Out to
switch off the device.
→ "Basic operation ", page 30
Advertisement
Table of Contents
