Table of Contents
Advertisement
Adjusting the brightness
► Press the
button to open the Brightness setting window.
► Press the
button or the
► Press the
button to close the menu.
Performing auto-adjustment of the monitor
This function is only intended for analogue image transmission (VGA).
► Press the
AUTO
The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press the
MENU
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Lock the ON/OFF button
The ON/OFF button can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the
ECO
The message Power button locked / unlocked is displayed.
To remove the locking of the ON/OFF button again, proceed in the same way.
Fujitsu
button to set the desired brightness.
button for about 1 second.
button and the ON/OFF button at the same time for several seconds.
button and
INPUT
button at the same time for a few seconds.
Operation
23
Advertisement
Table of Contents
