Din Rear-Mount; Fixing The Front Panel - Pioneer Premier DEH-P640 Installation Manual

Installation Installation

DIN Rear-mount

Installation using the screw holes on the side of the unit
1. Remove the frame. (Fig. 8)
Frame
Insert the release pin into the hole in
the bottom of the frame and pull out
to remove the frame.
(When reattaching the frame, point
the side with a groove downwards
and attach it.)
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 9) (Fig. 10)
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fitted),
and tighten the screws at 2 places on each side. Use either
truss screws (5 × 8 mm) or flush surface screws
(5 × 9 mm), depending on the shape of the screw holes in
the bracket .
Screw
Dashboard or Console
Factory radio mounting bracket

Fixing the Front Panel

If you do not operate the Detaching and Replacing the Front Panel Function, use the sup-
plied fixing screws and holder to fix the front panel to this unit.
1. Attach the holder to the front panel. (Fig. 11)
2. Replace the front panel to the unit. (Fig. 12)
Fig. 8
3. Fix the front panel to the unit using fixing screws. (Fig. 13)
Fig. 9
Fig. 10
<ENGLISH> <ENGLISH>
Fig. 11
Fig. 12
Fixing screw
Fig. 13