Installing The Canopy; Installing The Blades - Hunter Marconi Installation Manual

1886
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades

Put the blade washers found in the
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
Repeat x4
Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
hardware
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Canopy Blades
x2
Canopy Screw
bag
x12
Blade Screw
bag
x12
Blade Washer
bag
Note:
Fan style may vary.
Light Glass/Bulbs Remote