Using The Cradle - Mio Kiron Series User Manual

Using the Cradle

Depending on your model, a cradle and/or a mount may be provided for your device. Follow the
illustrations to mount your device.
To install the cradle:
1. Line up and connect the dock connector on the cradle to the dock connector on the device.
Magnets are incorporated to ensure proper alignment.
2. If needed, you can secure the device to the cradle with 2 screws.
To remove the cradle:
1. Remove the 2 screws (if installed) securing the device to the cradle.
2. While pressing and holding the release button on the cradle, pull the top of the device away and
lift the device out of the cradle in an upward motion.
Features of the cradle:
• Install a vehicle mount equipped with the AMPs hole pattern (may be sold separately).
• Charge the device via a 5V/2A car charger with a Micro-B USB cable (may be sold separately).
9