Charging The Battery; Extending The Battery Life - Mio Kiron Series User Manual

Table of Contents

Advertisement

L
Inserting the card in the reverse direction may cause damage.
L
The manufacturer does not guarantee the product's compatibilities with the storage cards from all manufacturers.
L
If you encounter access problems with your memory card, please visit the website https://www.sdcard.org/downloads/formatter_4/ and use
the "SD Memory Card Formatter 5.0 for SD/SDHC/SDXC" tool to format your memory card.

Charging the Battery

L
Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger.
When charging the battery for the very first time, you should charge it for at least 8 hours (using the AC
charger).
CAUTION: For optimal performance of the lithium battery:
Do not charge the battery where the temperature is high (for example, in direct sunlight).
There is no need to fully discharge the battery.
When storing the device for a long period of time, be sure to charge the device at least once every two weeks. Over discharge of the
device can affect the performance.
Failure to follow the battery usage instructions could cause damage to your device, battery and even bodily injury or property
damage, and will void any warranty.
1.
Push the tap outwards (
lock the plug in place (
L
The look of the charger plug varies depending on your region.
2.
Connect the Micro-B USB end of the USB cable to your device (
charger (
).
3.
Plug the AC charger to a wall outlet (

Extending the Battery Life

There are various ways to improve the device's battery life.
Always fully charge the battery.
Turn on Battery saver.
Turn off unnecessary sounds, such as touch sounds.
Close an app when you are not using it.
Use a shorter timeout setting of the screen.
Lower the brightness level of the screen.
Turn off Bluetooth when you are not using it.
Prevent the device from constantly scanning for available wireless networks.
Enable Aeroplane mode to turn off all wireless transmission functions.
To change settings, tap
8
), insert the plug to the AC charger and then push the tap inwards to
).
).
on the desktop  Settings.
), and the other end to the AC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Miowork f700 f700

Table of Contents