Sleep Mode; Aeroplane Mode; Restarting The Device; Turning Off - Mio Kiron Series User Manual

Table of Contents

Advertisement

Sleep Mode

Your device will automatically switch off the screen after 1 minute (by default) of inactivity. You can
manually switch off the screen by pressing the Power button briefly.
To resume the screen, press the Power button briefly and then unlock the device by dragging the Lock
icon ( ) upwards.

Aeroplane Mode

When you are in an aeroplane or in the area where data transferring is not allowed, enable Aeroplane
mode. You will be able to use many of your device's applications, but all wireless radios, including
wireless networks and Bluetooth, on the device are turned off – it cannot send or receive data.
To enable Aeroplane mode: press and hold the Power button to display the options menu and tap
Aeroplane mode. The
L
You can enable WIFI and Bluetooth in Aeroplane mode.
To disable Aeroplane mode: tap
tap the Aeroplane mode switch to turn it off.

Restarting the Device

You may need to reset the device when the device is running slower or improperly. Press and hold the
Power button to display the options menu and tap Reboot to restart the device.

Turning Off

To turn off the device, press and hold the Power button to display the options menu and tap Power off.

Shutting Down

If the device stops responding, you may need to shut down the device by pressing and holding the
Power button for 8 seconds.

Connecting the Device to a Computer

To connect the device to a computer, connect the Micro-USB end of the USB cable to your device and
the other end to a USB port in your computer.
When you connect the device to your computer for the first time, allow the USB driver of the device to
be installed properly on your computer.

Transferring Files Between the Device and Your Computer:

1.
Change the modem setting from USB to UART and restart the device. (For more information, see
"Modem Interface" on Page 34.)
2.
Connect the device to the computer using the USB cable.
3.
Slide down from the top of the screen with one finger to open the Notifications panel, and tap
USB for charging. From the Use USB for notification, tap File transfers.
4.
You can now transfer files between the two devices.
icon in the status bar indicates that Aeroplane mode is on.
on the desktop  Settings  More in Wireless & networks, and
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Miowork f700 f700

Table of Contents