INSTALLATION
1 Prepare for installation.
Before installing your rangehood:
Please read the instructions carefully.
●
Unpack the rangehood and check that all functions are working.
●
Ensure that the voltage (V) and the frequency (Hz) indicated on the serial plate
●
match the voltage and frequency at the installation site.
The stainless steel and glass surfaces of the rangehood are very easily damaged
●
during installation if grazed or knocked by tools. Please take care to protect the
surfaces during installation.
Protect the cooktop surface below with cardboard, or the like, to prevent damage
●
occurring whilst the rangehood is being installed above.
2 Fit the 150 mm ducting adapter with non return flap to the rangehood using the screws
supplied.
3 Provide an opening on the underside of the cupboard (see product and cabinetry cutout
dimensions).
4 Remove the filter from the rangehood.
INSTALLATION INSTRUCTIONS
11