Siemens CPU 1513-1 PN Equipment Manual page 20

Product overview
3.3 Hardware properties
View of the module
The following figure shows the CPU 1513-1 PN.
Figure 3-1 CPU 1513-1 PN
NOTE
Protective film
Note that a protective film is attached to the display of the CPU when shipped from the
factory. Remove the protective film if necessary.
Properties
The CPU 1513-1 PN has the following technical properties:
Property
CPU display
20
Description
All CPUs of the SIMATIC S7‑1500 product series feature a
display with plain text information. The display provides
information on order numbers, firmware version and
serial numbers of all connected modules. In addition,
you can set the IP address of the CPU and carry out fur­
ther network settings. The display shows occurring error
messages directly in plain text.
In addition to the functions listed here, a multitude of
other functions that are described in the SIMATIC
S7-1500 Display Simulator are shown on the display.
Additional information
• S7‑1500, ET 200MP system manu­
al
(http://support.automation.
siemens.
com/WW/view/en/59191792)
• SIMATIC S7‑1500 Display Simulat­
or
(https://support.industry.siemens.
com/cs/ww/en/view/109761758)
CPU 1513-1 PN (6ES7513-1AM03-0AB0)
Equipment Manual, 11/2022, A5E40881673-AC