Introduction; Foreword; Target Group; Written Styles In This Document - ebm-papst ECI-42 K1 Series Translation Of Original Operating Instructions

Drives for siemens partner range simatic micro-drive
Table of Contents

Advertisement

Drive concepts
Drive concepts
SIMATIC MICRO-DRIVE
SIMATIC MICRO-DRIVE
1

Introduction

1.1 Foreword

These operating instructions describe the possible uses, installation and operation of the servomotors from the Siemens product
partner range for SIMATIC MICRO-DRIVE for the safety extra-low voltage range. When installing and operating the servomo-
tors, all of the safety information listed in Chapter 2 must be adhered to. Abroad, the corresponding laws, guidelines, and regula-
tions of the relevant country also apply.
Read these operating instructions carefully before you start working on the drive. Observe the following warning notices in order
to avoid risk of injury or malfunction of the drive.

1.2 Target group

These operating instructions are only intended for authorized specialist personnel with knowledge of electronics and mechanics
(see chapter "2.5 Personnel qualifications" on page 7). Commissioning, installation, maintenance, and other work on or in
connection with the drive must only be carried out by these groups of people.

1.3 Written styles in this document

In these operating instructions, the meaning of certain sections is indicated through various means.
Descriptive text is shown without a preceding symbol.
• Text preceded by a dot (•) indicates a list introduced by a heading.
Underlined blue text
indicates a cross reference, which can be clicked on in the PDF document. Upon doing so, the screen will
jump to the relevant section of the document.

1.4 Warning notices and notices

Warning notices and notices are always shown before an instruction where carrying out the action could result in a hazard or
material damage.
In this documentation, the following warning notices are used:
Hazard
This notice indicates a hazard with a high level of risk that will directly result in death or severe bodily injury if
it is not avoided.
DANGER
→ This arrow highlights a corresponding precautionary measure in order to prevent the hazard.
Hazard
This notice indicates a hazard with a moderate level of risk that may possibly result in death or severe bodily
injury if it is not avoided.
WARNING
→ This arrow highlights a corresponding precautionary measure in order to prevent the hazard.
Hazard
This notice indicates a hazard with a low level of risk that may result in light or moderate bodily injury and
material damage if it is not avoided.
CAUTION
→ This arrow highlights a corresponding precautionary measure in order to prevent the hazard.
Notices contain information that is particularly important at the relevant point or make the operating steps described easier.
They are emphasized as follows:
This notice provides you with recommendations for use and helpful tips.
NOTICE
Item no.: 601.2055 · ENU · Change V1.1 · Release 2022-10-11
Introduction
5/28

Advertisement

Table of Contents
loading

Related Products for ebm-papst ECI-42 K1 Series

Table of Contents