Electrical Installation; Eci-42.Xx-K1 And Eci-63.Xx-K1 Interfaces - ebm-papst ECI-42 K1 Series Translation Of Original Operating Instructions

Installation

5.3 Electrical installation

Damage to the drive; ensuring smooth operation
→ Do not bend the cables
→ Fit the cables to the plugs without tensile stress
→ Protect the drive and plug connections against splashing water
CAUTION
→ Operate the drive only in conjunction with the Siemens drive controllers (PDC (=Profi Drive Control) or F-TM
ServoDrive) and the cable defined by Siemens (observe max. cable length).
→ Only allow work to be carried out by authorized specialist personnel.
Mechanical installation should be performed first before electrical hookup.
→ Make sure that the cables are de-energized.
→ Secure against renewed switch-on of the operating voltage.
DANGER
→ Never work on live parts.

5.3.1 ECI-42.XX-K1 and ECI-63.XX-K1 interfaces

Electrical hookup without brake
7
6
5
4
B
3
2
1
Electrical hookup with integrated brake
13
14
22/28
HALL
C
8
9
10
A
Encoder
11
12
Motor
HALL
Encoder
Motor
Brake
Item no.: 601.2055 · ENU · Change V1.1 · Release 2022-10-11
Pin Connection
1 H A
2 H B
3 H C
4 +12 V
5 GND
6 -
7 A Encoder, channel A
8 /A Encoder, channel A, negated
9 B Encoder, channel B
10 /B Encoder, channel B, negated
11 +5 V
12 GND
A U Winding connection U
B V Winding connection V
C W Winding connection W
Pin Connection
1 H A
2 H B
3 H C
4 +12 V
5 GND
6 -
7 A Encoder, channel A
8 /A Encoder, channel A, negated
9 B Encoder, channel B
10 /B Encoder, channel B, negated
11 +5 V
12 GND
A U Winding connection U
B V Winding connection V
C W Winding connection W
13 +24 V
14 GND
Drive concepts Drive concepts
SIMATIC MICRO-DRIVE SIMATIC MICRO-DRIVE
Identifier
Hall signal A
Hall signal B
Hall signal C
Power supply
Ground
Blank
Power supply
Ground
Identifier
Hall signal A
Hall signal B
Hall signal C
Power supply
Ground
Blank
Power supply
Ground
Power supply
Ground