Table of Contents
Advertisement
The second screen (Fig. . page ) contains settings for Neota Route (cloud) . This service is described in more
detail in Chapter . - Neota Route (cloud) (page ).
The rst item NR server sets the address of the Neota Route server.
User name NR can be used to enter the user name for logging in Neota Route. The user name is pre-set as the pump serial
number.
Password NR can be used to enter the password for the user name. The password is pre-set, just request the activation of
Neota Route via e-mail at podpora@neota.eu
Status displays Neota Route connection information.
NR service (cloud) can be used to activate Neota Route.
When changing Neota Route settings, these changes must be registered by activating Use new settings NR .
The third screen (Fig. . page ) contains E-mail settings , which can be used to set the parameters for sending
error e-mails.
The e-mail settings screen (Fig. .6 page ) can be used to set e-mail sending.
Send err email can be used to activate sending of error e-mails. Recipient sets the e-mail address to which the
error message will be sent.
Subject sets the subject of the error e-mail.
Figure .: Settings section – screen Network settings
Figure .: Settings section – screen Network settings
Advertisement
Table of Contents
