NeoRe TG MINI Series User Manual page 22

￿.￿.￿ Simpli￿ed setting of the weather compensation curve – SIMPLE NEO
Pressing the house icon on the Overview screen (Fig. ￿.￿ page ￿￿) displays simpli￿ed setting of the weather compen-
sation curve – SIMPLE NEO (Fig. ￿.8 page ￿￿). In simpli￿ed setting of the weather compensation curve (SIMPLE NEO), you
can ￿nd:
H/C is used to switch heating/cooling on or off like on the previous screen.
More.. is used for initial selection of the weather compensation curve according to the energy class of the building. Just
press the coloured label in the right column and the weather compensation curve will automatically readjust (Fig. ￿.￿)
+ and - is used to increase/decrease the desired temperature of heating/cooling water by a maximum of ￿ °C from the
default temperature
Back.. is used to return to the Overview
Menu is used to return to the default screen
During ￿rst start, choose the energy class of the building under the More.. button, which will automatically adjust the
weather compensation curve (Fig. ￿.￿ page ￿￿). You can then ￿ne-tune the weather compensation curve according to the
situation by pressing Plus or Minus on the previous screen (Fig. ￿.8 page ￿￿).
Figure ￿.8: Overview section ￿ SIMPLE NEO
Figure ￿.￿: Overview section ￿ SIMPLE NEO ￿ More..
￿￿