Page 2
To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions or comments about the PHC-24G headend combiner, please contact your dealer or have him contact the PICO MACOM Service Center at these phone numbers: 800-421-6511, 818-493-4300.
Page 3
PHC-24G Manual.qxd 7/9/03 1:42 PM 11. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appli- ance dealer or local power company.
Page 4
Both units can also serve as high quality rack-mounted high-isolation distribution split- ter networks. Pico Macom backs up this product with its industry leading 5-year limited warranty. www.picomacom.com...
Page 6
PHC-24G Manual.qxd 7/9/03 1:43 PM Operation and Controls PHC-24G PHC-24G 1 GHz Broadband Passive Headend Combiner Front Panel Controls -20 dB Test Point: The -20 dB test point is provided for system setup and monitoing. Back Panel Controls Inputs: The source input RF signal from each channel is connected to these ports.
Install chassis in equipment rack (equipment rack sold sep- arate by supporting the bottom and rear of the PHC-24G at the desired elevation in rack. Line up the side holes of chassis with the tapped equip- ment rack holes.
We will issue an invoice for the List Price of the loaner unit plus shipping costs. When you receive the loaner unit, pack the failed unit in the loaner unit’s box and ship it freight prepaid to Pico Macom for repair. When you receive the repaired unit, a new RMA number will be provided in the box. Carefully pack the loaner unit and affix the new RMA number on the box and ship it back to us for full credit excluding shipping costs.
Need help?
Do you have a question about the PHC-24G and is the answer not in the manual?
Questions and answers