Pico Macom MOR-CS Specifications

MOR-CS_fab07.qxd 4/2/07 2:53 PM
Descriptions
MOR-CS
Mini Headend Cooling System
Increases electronic equipment
longevity, reducing equipment
temperature to 2-5 degrees above
ambient.
Improves computer floor forced air
systems, enhancing the normal
cooling process
Large mesh covered flow channels
provide increased air circulation
Low noise brushless blowers
produce extremely quiet smooth
operation
Reduces dust buildup in rack and
on equipment
Circuit protected power supply
protects from current overload
Auxilliary AC outlet for
convenience
Maintenance-free, energy efficient
design for years of low cost
operation
Rack mount design fits standard
19˝ EIA rack width
Compact 1 RU high
6260 Sequence Drive, San Diego, CA 92121
Ph: 858-546-5050 Fax: 858-546-5051
Rev. 03/07
Page 1
MOR-CS
Mini Headend Cooling System
The Pico Macom MOR-CS headend equipment cooling system provides
effective heat exchange of rack mounted electronic equipment. Three centrifugal
blower fans intake warm air from the bottom and expel it out the front of the
unit, ideally suiting the MOR-CS for use with Pico Macom's MPC-12 line of
mini-chassis and those of other manufacturers. The MOR-CS increases the
lifespan of electronic equipment by reducing heat build-up and enabling cooler
operation. The auxiliary AC outlet provides a convenient place to plug in
equipment while reducing the number of required AC receptacles.
Pico Macom backs this product with its industry leading 5 year limited warranty.