Adjusting Or Turning Off The Continuous Backlighting - Carrier Edge TP-PHP01-A Owner's Manual

ADVANCED PROGRAMMING OPTIONS

Adjusting or turning off the continuous backlighting

Your thermostat may feature a low level amount of backlighting until you press any
button, which increases the lighting temporarily. You can adjust the intensity of the
backlighting or turn if off completely. The range is off (OF) 1 to 5 brightness.
Here's how.
1. Open the door.
2. Press and hold the buttons underneath the heat and
cool setpoints simultaneously (the two bottom buttons
on the right) until the screen displays the reset reminders
and 01 in the lower right corner.
3. Press the up arrow button until 01 changes to 03 with
the number 3 (default backlight) next to it.
4. To increase backlight level, press the rightmost lower
button then press the up arrow button until 4 or 5
appears. To decrease the backlight level, press the
rightmost lower button then press the down arrow
button until 2, 1 or OF (off) appears.
38