Adjusting Or Turning Offthe Continuous Backlighting - Carrier Performance Non-Programmable ADGE Owner's Manual

Adjusting or
turning off the continuous backlighting
Your thermostat features a continuous low level backlighting until you press any
button, which increases the lighting temporarily. You can adjust the intensity of the
backlighting or turn if off completely. Here's how.
o _ o
1. Open the door. o o
2. Press and hold the features button for about three
seconds. The screen will display 01 and the three reset • o
reminders.
3. Press the up button twice to advance from 01 to 03. o o
4. Press the sleep button under the intensity number (3) so
it flashes, o o
5. To increase the amount of backlighting, press the up but- o_o
ton. To decrease the amount, press the down button. The o_oe o
range is Of to 5 with off being no backlighting and 5 be-
ing the brightest backlighting, o o
6. Press
the done
button, o_e
7. Close the door. o_e
o o