Table of Contents
Advertisement
Chapter 2
Note: If the login page does not appear, please refer to the
4. After successful login, follow the step-by-step instructions to complete the initial
configuration.
5.
Enjoy!
For wireless devices, you may have to reconnect to the wireless network if you
have customized the SSID (network name) and password during the configuration.
2. 2. 3.
Range Extender Mode
This mode boosts your home wireless coverage.
Step 1: Configure
Tips: Using WPS Button is an easy way to extend your host network. We recommend you to use this way if your host
router has a WPS button. The button might look like one of these:
• Option One: Using the RE Button
1 ) Press the WPS button on the host router.
2 ) Press and hold the
seconds within 1 minute. The router will start to reboot.
3 ) Once rebooted, the
indicating successful connection.
• Option Two: Using a Web Browser
1 ) Connect a computer to the router via an Ethernet cable or wirelessly by using
the SSID (Network Name) and password printed on the label at the bottom of
the router.
2 ) Enter
http://tplinkwifi.net
password for future logins.
FAQ
section.
(RE button) on the top panel of the router for about 3
RE LED
should change from blinking to a solid state,
in the address bar of a web browser and create a
Connect to the Internet
|
|
WPS
.
11
Advertisement
Table of Contents
