Installing The Canopy; Installing The Blades - Hunter Anslee 50231 Installation Manual

1886
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades

Put the blade washers found in the
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
Repeat x5
Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
hardware
bag
bag
Canopy Blades
x2
Canopy Screw
bag
x15
Blade Screw
x15
Blade Washer
Light Glass/Bulbs