Hunter Anslee 50231 Installation Manual page 10

1886
Repeat x2
9
Installing the Pull Chains
Remove and discard the plastic
connectors from the ends of the short
pull chain. Feed the pull chains from
the fan switch and the light switch
down through the holes in the upper
switch housing as shown. Attach the
pull chain pendants to the light and fan
pull chains.
Reversing the Fan
Reverse
Switch
Ceiling fans work in two directions: downdraft and updraft.
To change the direction of air flow, turn the fan off and let
it come to a complete stop. The reversing switch is located
inside the light fixture. It can only be accessed when the glass
is removed. Slide the reversing switch to the opposite position.
Restart the fan.
The fan pull chain controls
the speed: from high to off.
The light pull chain controls
the light fixture: on and off.
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.