Safety Information - Canon IVY CLIQ+2 User Manual

Please read the following instructions and safety precautions before using the device.
For regulatory and additional safety information, refer to the Regulation and Warranty
Information sheet included in your package contents.
RMN: PP2001
Regulatory Model Identification Number is assigned for regulatory identification
purpose.
WARNING
• Keep away from children and infants. Improper use of this product may cause
suffocation or accident.
• Stop using the device immediately if it emits smoke or a strange smell, or
otherwise behaves abnormally.
• Do not look at the sun or bright lights through the viewfinder or the lens.
Blindness or vision problems could result.
• Do not fire the flash near the eyes. It may hurt the eyes.
• A strap wound around a child's neck may result in asphyxiation. If your product
uses a power cord, mistakenly winding the cord around a child's neck may result
in asphyxiation.
• Turn the device off in places where camera use is prohibited. The
electromagnetic waves emitted by the camera may interfere with the operation
of electronic instruments and other devices. Exercise adequate caution when
using the product in places where use of electronic devices is restricted, such as
inside airplanes and medical facilities.
CAUTION
• When operating in extreme weather, the device might not print. Let the printer
temperature adjust to the recommended operating temperature of 59º to 90ºF
(15º to 32ºC), before attempting to print again.
• When charging, please charge the device at the recommended temperature of
59º to 90ºF (15º to 32ºC).
• Use a soft dry cloth to clean the device. Do not clean with a damp cloth or
volatile liquids such as paint thinner.
• Keep the top cover closed to avoid dust and other particles from entering the
inside of the device.
• If the device is not functioning properly, please contact the dealer you purchased
this product from or Canon Service & Support at www.usa.canon.com/support
• Never expose the battery to high temperatures, direct heat, or dispose by
incineration.
• Electromagnetic interference or electrostatic discharge may cause the device to
malfunction or the memory to be lost or altered. Should this occur, use a pin, or
similar item to press the [RESET ] button at the bottom of the device.

SAFETY INFORMATION

READ BEFORE USE