Table of Contents
Advertisement
4.5
Removing Back Cover
Remove back cover, by opening the screws (M4x5) located at
the center back of the cover.
Figure 4-2
Figure 4-3
Remove the screws (M4x5) located at the sides of the metal
frame.
Figure 4-4
Mechanical Instructions
4.6
Internal Cabling
Disconnect the cables from the LCD display to back cover. Two
cables must be disconnected when removingthe back cover
(speakersa and STBY switch).
F_15730_001.eps
260505
4.7
Handling of the Display
Once removed from the mirror TV, the display and LC4.6E
chassis can be accessed and repaired in the normal way (see
LC4.6E service manual). But again, do not remove the display
from the set, unless the fault relates to the LCD panel.
F_15730_002.eps
260505
Note: The display has a strip of foam attached to it all around
the perimeter of the front face, to allow even contact with the
front part of the mirror TV aluminum frame.
F_15730_003.eps
260505
LC03E MV AA
Figure 4-5
Figure 4-6
Shorter
foam
LCD Panel Display Area
Longer foam
Figure 4-7 Front part
4.
EN 7
F_15730_004.eps
260505
F_15730_005.eps
260505
Aluminium Rim of LCD Panel
F 15730 007.eps
Advertisement
Table of Contents
