Changing The Program - Modena WP 1200 FDWH User Manual Book

•
Pour in the detergent or place the detergent tablet in the
detergent compartment and close firmly afterwards.
•
Press the Power button, the power indicator light will illuminate.
• Select the wash cycle program by pressing the Program (P) button
•
The indicator light of the selected programme will illuminate.
•
Close the dishwasher door. A click sound should be heard when
the door is closed correctly. Do not slam the door.
•
The wash cycle will begin shortly.
WARNING!
If you open the door when the wash cycle is in progress and close
it again, the wash cycle will continue after 10 seconds. But of the
door is not closed properly after 1 minute, the appliance will ring a
bell with 1 minute intervals

Changing The Program

A wash cycle can only be changed if it has been running for a short
time. Otherwise, the detergent may have been released and the
dishwasher has drained the rinse water. If this is the case, the
dishwasher needs to be restarted and the detergent dispenser must be
refilled. To restart the dishwasher, follow the instructions below:
1. Open the door to check if the dispenser is released from the
dispenser
2. If the dispenser door is opened, let the wash cycle complete first
3. If the dispenser door is still closed, press and hold Program (P)
button for 3 seconds to cancel the current wash program. Then,
choose the new wash program and close the door
26