Positioning The Appliance - Modena WP 1200 FDWH User Manual Book

How to Drain Excess Water
If the sink is 1000 mm higher or more than the floor, the excess water
in hoses cannot be drained directly to the sink. It will be necessary to
drain the excess water from hoses to a bowl or bucket or suitable
container that is held outside and is lower
Water Outlet
Connect the water drain hose. The drain hose must be installed
properly to avoid water leaks. Ensure that the water drain hose is not
kinked or crushed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain
hose. It must be no longer than 4 meters, otherwise the cleaning effect
of the dishwasher could be reduced.
Syphon Connection
The waste connection must be at a height less than 100 cm (maximum)
from the bottom of the dish. The water drain hose should be in a fixed
condition.

Positioning the Appliance

Position the appliance in the desired location. The back should stick to
the wall behind it, and the sides to the adjacent cabinets or wall. The
dishwasher is equipped with water inlet hose and drain hose that can
be positioned to the right or the left to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for leveling, the height of the
dishwasher can be adjusted by rotating the screw level of the feet. The
appliance must not be skewed more than 2°.
Freestanding Installation
The height of the dishwasher is 845 mm. It has been designed to fit the
machine between the existing cabinets of the same height in modern
kitchen cabinet. The feet can be adjusted so the desired height is
reached. The laminated top of the machine does not require any
12