Sony ILME-FX3 Help Manual page 420

Help Guide
Interchangeable Lens Digital Camera
ILME-FX3
Ver.2 or later
Security(IPsec)
Encrypts data when the camera and a computer communicate via a wired LAN or Wi-Fi connection.
MENU → (Network) → [Network Option] → [Security(IPsec)] → desired setting.
1
Menu item details
IPsec:
Sets whether or not the [Security(IPsec)] function is used. ([On]/[Off])
Dest. IP Address:
Sets the IP address of the device to connect using the [Security(IPsec)] function.
Shared Key:
Sets the shared key used by the [Security(IPsec)] function.
Note
Use at least eight and no more than 20 alphanumeric characters or symbols for [Shared Key].
When you enter the shared key, note that unmasking the shared key risks revealing it to a third party. Make sure that no one is
around before unmasking.
For IPsec communications, the device to connect must be compatible with IPsec.
Depending on the device, communications may not be possible or the communication speed may be slow.
On this camera, IPsec operates in transport mode only and uses IKEv2.
The algorithms are AES with 128-bit keys in CBC mode/Diffie-Hellman 3072-bit modp group/PRF-HMAC-SHA-256/HMAC-SHA-
384-192.
The authentication expires after 24 hours.
Encrypted communications can only be made with devices that are configured correctly. Communications with other devices are
not encrypted.
For details on the IPsec configuration, consult the administrator of the network for your device.
The [Security(IPsec)] function cannot be used when [Access Authen.] under [Access Authen. Settings] is set to [On].
Related Topic
Using the keyboard
5-043-414-12(1) Copyright 2022 Sony Corporation
420