Sony ILME-FX3 Help Manual page 203

Interchangeable lens digital camera

Hide thumbs Also See for ILME-FX3:

Table of Contents

When [Log Shooting] is set to [Cine EI Quick] or [Cine EI]:

The EI value, latitude, Base ISO ([L] for low sensitivity and [H] for high sensitivity) are displayed.

Example: 800EI/6.0E/L

The second numerical value of the setting indicates how many steps of brightness information are assigned for bright

areas (brightness higher than 18% gray). Areas brighter than these are overexposed.

Example: In "800EI/6.0E," 6.0 steps are assigned on the bright side.

To output RAW movies to another device connected via HDMI, set [Log Shooting] to an item other than [Off]. The [Color Gamut]

setting is also applied to RAW movies output via HDMI.

[Embed LUT File] is locked to [Off] when using SD cards or SDHC cards.

When [Log Shooting] is set to an item other than [Off], this may cause an error in the white balance custom setup. In such a case,

temporarily set [Log Shooting] to [Off], perform the custom setup, and then reset [Log Shooting] to the desired setting.