Histogram Display - Sony ILME-FX3 Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILME-FX3
Ver.2 or later

Histogram display

A histogram shows the luminance distribution, displaying how many pixels there are by luminance.
To display the histogram on the shooting screen or playback screen, press the DISP (Display Setting) button repeatedly.
How to read the histogram
The histogram indicates darker values toward the left and brighter values toward the right.
The histogram changes depending on the exposure compensation.
A peak at the right or left end of the histogram indicates that the image has an overexposed or underexposed area,
respectively. You cannot correct such defects using a computer after shooting. Perform exposure compensation before
shooting as necessary.
(A): Pixel count
(B): Brightness
Note
The information in the histogram display does not indicate the final photograph. It is information about image displayed on the
screen. The final result depends on the aperture value, etc.
The histogram display is extremely different between shooting and playback in the following cases:
When the flash is used
When shooting a low luminance subject such as a night scene
Related Topic
Using the DISP (Display Setting) button
Exposure Comp. (still image/movie)
5-043-414-12(1) Copyright 2022 Sony Corporation
180