Sony ILME-FX3 Help Manual page 212

Interchangeable lens digital camera

Hide thumbs Also See for ILME-FX3:

Table of Contents

To reset adjusted values for each "Look"

Adjusted values such as contrast that you have changed as desired can be collectively reset for each "Look." Press the

(delete) button on the adjustment screen for the "Look" that you want to reset. All adjusted values that have been

changed will return to their default values.

For [Sharpness], [Sharpness Range], and [Clarity], take a test shot and either enlarge and play it on the camera monitor, or

output it to a playback device to check the effect. Then, readjust the setting if needed.

Creative Look] is fixed to [ST] in the following situations:

[Intelligent Auto]

Picture Profile] is set to other than [Off].

[Log Shooting] is set to other than [Off].

When this function is set to [BW] or [SE], [Saturation] cannot be adjusted.

In the movie mode, [Sharpness Range] cannot be adjusted.