Daikin ROTEX GW-20 H18 Installation Instructions Manual page 4

These installation instructions
With these installation instructions, you can safely assemble, install and maintain the
unit. Carefully follow the instructions.
In case of any doubt, please contact the manufacturer.
Keep the installation instructions near the unit.
Abbreviations and terms used
Description
High Efficiency
Rotex RHOB12AAV1H, RHOB18AAV1H,
RHOB42AAV1H
Unit with piping for central heating
System with pipes for domestic hot water
Symbols
The following symbols are used in this manual:
CAUTION
Procedures which - if they are not carried out with the
necessary care - may cause damage to the product, the
surroundings, the environment or injury.
IMPORTANT
Procedures and/or instructions which, if they are not
followed, will have a negative effect on the functioning of the
unit.
Service and technical support for the installer
For information about specific settings, installation, maintenance and repair work, as
an installer, please contact your local Rotex dealer.
Identification of the product
You will find the unit details on the type plate on the bottom of the unit.
Unit type
•
Bar code with article number and serial number
•
Options
•
ROTEX Heating Systems GmbH
To be referred to as
HR
Unit
CH installation
DHW installation
4