Hitachi RPC-5.0FSR Operation Manual page 23

Inverter-driven multi-split system heat pump air conditioners, ceiling
Table of Contents

Advertisement

(2) Remove the air filter.
Push the air filter toward arrow direction to
unhook it from the air inlet grille, and remove
the air filter.
Air Filter
Lift up the air filter.
(3) Clean the air filter.
• Vacuum the dust by a cleaner, or wash the air
filter by water or neutral detergent.
• Dry the air filter in the shade.
(It is to prevent the air filter from degradation
by ultraviolet.)
NOTE
• Do not use hot water more than 50
The air filter may be deformed by heat.
• Do not dry the air filter by an open fire, a dryer or
a heater. The air filter may be deformed.
(4) Attach the air filter.
After the air filter is dried, attach correctly to
the air inlet grille.
(5) Close the air inlet grille.
NOTE
Be sure to attach the air filter.
If the indoor unit is operated without the air filter, it
may cause malfunction of the indoor unit.
A10762290A
Upper Side
Catch
Lower Side
Catch
o
C.
(6) Reset the filter sign.
NOTE
If the accumulated time of filter cleaning is not got
to setting time, the indication " " is turned ON
and "Setting Disabled" will be displayed.
• Press "Menu".
Select "Reset Filter Sign Time" from the menu
and press "OK".
The confirmation screen will be displayed.
Menu
Simple Timer
Reset Filter Sign Time
Operation Schedule
Elevating Grille
Power Saving Setting
Sel.
• Select "Yes" by pressing " " or " " and press
"OK".
The indication of "FLTR" will be turned OFF
and the screen will return to the normal mode.
15:10(Fri)
01
/
05
Entr
Rtrn
OK
Back
17

Advertisement

Table of Contents
loading

Table of Contents