D-Link DGS-1016S Quick Install Manual

Quick Install Guide
16-Port Gigabit Desktop Switch
Thank you for purchasing the DGS-1016S 16-Port Gigabit Desktop Switch. Follow the steps
in this guide to properly set up your switch. Please verify that all the package contents listed
below are available.
Package Contents
• DGS-1016S 16-Port Gigabit Desktop Switch
• Four rubber feet
• Wall mounting kit
• Power adapter
If any of the above items are missing, please contact your reseller.
Before You Begin
• Visually inspect the power adapter and make sure that it is fully secured to the power
socket of the switch.
• Do not cover the ventilation holes on the sides of the switch, and make sure there is
adequate ventilation around it.
• Do not place heavy objects on the switch.
• Place the switch in a cool and dry environment.
DGS-1016S
Wall Mount Installation
Two mounting slots are provided on the bottom of the switch for wall mounting. Please make
sure to keep the front panel exposed in order to view the status LEDs. Please refer to the
illustrations:
A.) Mounting on a concrete wall
1. Fix the nylon screw anchors into the concrete wall.
2. Drive the T3 x 15L screws into
the nylon screw anchors.
3. Hook the switch with the mounting holes on the
bottom onto the screws, and it is completed.
B.) Mounting on a wooden wall
1. Drive the T3 x 15 L screws into the wooden wall.
2. Hook the switch with the mounting holes
on the bottom onto the screws.
Connecting to the Switch
Step 1
Plug the supplied power adapter into the switch and the other end into a power outlet. Verify
the Power indicator is lit on the switch.
Step 2
Connect one end of an Ethernet cable to the device you want to connect to the switch and the
other end into one of the Ethernet ports on the switch. Check the Link lights (LEDs) on both
the switch and the device to verify that the cable is good and that there is a proper connection.
Note: A Category 5 (or higher) Ethernet cable must be used for 100Mbps or higher operation.
LEDs
Power Indicator - This green indicator light is on when the switch is receiving power;
otherwise, it is off.
Link/Act - This LED indicator light is green when the port is successfully connected to an
1000Mbps device and will blink as data is transmitted or received.
This LED indicator light is amber when the port is successfully connected to an 100Mbps or
10Mbps device and will blink as data is transmitted or received.
Network
Computer NAS Laptop
DGS-1016S
Energy-efficient and Eco-friendly
The DGS-1016S will conserve energy automatically through several methods:
1. The switch can detect when a connected device is shut down or when there is no Ethernet traffic
and can automatically reduce the power used for that port, cutting power usage substantially.
2. The switch optimizes power usage for each port for the length of cable connected to it, using only
as much power as is required.
Technical Support
Having trouble installing your new product? D-Link's website contains the latest user documentation and
software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support
through our website or by phone.
United States Canada
Internet: http://support.dlink.com Internet: http://support.dlink.ca
Copyright ©2020 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other
trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual
product appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.00(NA) | May 28,2020 5402637
Router Internet