Electrical Safety; Mains Plug Replacement; Package Contents - DeWalt DWV905M Original Instructions Manual

EnGLIsH
• Do not place heavy objects on vacuum.
• For dust extractors it is necessary to provide for an adequate
air change rate L in the room if the exhaust air is returned to
the room.
(NOTE: Reference to National Regulations is necessary.)

Electrical Safety

The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
If the supply cord is damaged, it must be replaced only by
D WALT or an authorised service organisation.
e
When operating the dust extractor in a humid environment, use a
residual current device (RCD) protected power supply. The use of a
residual current circuit breaker reduces the risk of an electric shock.

Mains Plug Replacement

(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

WARNING: 115 V units have to be operated via a fail-safe
isolating transformer with an earth screen between the
primary and secondary winding.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.

Package Contents

The package contains:
1 Dust extractor
1 Hose; diameter 32mm
1 Connector kit
2 Filters
1 Wireless Tool Control™ remote
1 Sticker with dust class H warnings (DWV905H)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
28
Markings on Dust Extractor
The following pictograms are shown on the appliance:
Read instruction manual before use.
WARNING: This appliance contains harmful dust. The
emptying and maintenance, including the removal of
the dust bag, may only be executed by trained personnel
wearing suitable protection equipment. Do not switch on
until the complete filter system has been installed.
DWV905M
DWV905H
Description (Fig. A)

WARNING: Never modify the power appliance or any part
of it. Damage or personal injury could result.
Top handle/cord wrap
1
Power cord
2
; the
2 Vacuum head
3
Canister latch
4
Wheel
5
Canister
6
Suction hose
7
Casters (one equipped with parking brake)
8
Filters
9
Twist-lock hose inlet
10
Hose clip
11
Front handle
12
Outlet for power tools
13
Variable suction dial
14
On/off tool control switch
15
Three-position switch
16
Wireless Tool Control™ pairing button
17
Telescoping handle release button
18
Telescoping handle
19
Inlet plug
20
Bag
21
DWV9210-XJ connector kit (includes DWV9000, DWV9120,
22
DWV9130)
Date code
23
Dust class warning label
24