Starting Over - ProSoft Technology RadioLinx RLXIB-IH2N-W Setup Manual

RLXIB-IH2N-W ♦ 802.11n
Weatherproof Dual Industrial Hotspot
4.4

Starting Over

If necessary, you can always restore the default settings that were present when
the radio was manufactured.
1 Open the Radio Configuration/Diagnostic Utility
2 Log into the radio
3 Click the Utilities button, and then click the Default button.
This will remove all changes you have made to the radio configuration,
including addressing, naming, and security settings.
Page 28 of 29
If You Encounter Problems
Setup Guide
ProSoft Technology, Inc.
April 22, 2010