Retrieve The Default Password - ProSoft Technology RadioLinx RLXIB-IH2N-W Setup Manual

If You Encounter Problems
Setup Guide
4.3

Retrieve the Default Password

If you forget your
can retrieve the default
the settings you programmed before. To retrieve the default
return the radio to its default settings, follow these steps:
1 Turn off power to the radio.
2 Feel for the reset button, located under the red "diamond" on the face of the
radio.
3 Turn on power to the radio, and wait for the Power LED to turn green.
4 When the Power LED turns green, press and hold the reset button for at least
five seconds.
5 The radio will reload its default settings, including the
now be able to log in using the default
The default administrator
o
The default
o
The
USERNAME
o
ProSoft Technology, Inc.
April 22, 2010
, you will be unable to change the radio settings. You
PASSWORD
to use the software again, but you will lose all
PASSWORD
USERNAME
is "password"
PASSWORD
and
PASSWORD
Weatherproof Dual Industrial Hotspot
PASSWORD
and
USERNAME PASSWORD
is "admin"
are case sensitive
RLXIB-IH2N-W ♦ 802.11n
and
PASSWORD
. You should
.
Page 27 of 29