If You Encounter Problems; Check The Ethernet Cable - ProSoft Technology RadioLinx RLXIB-IH2N-W Setup Manual

If You Encounter Problems

Setup Guide
4 If You Encounter Problems
In This Chapter
Check the Ethernet cable ...................................................................... 25
LED Display........................................................................................... 26
Retrieve the Default Password .............................................................. 27
Starting Over ......................................................................................... 28
4.1

Check the Ethernet cable

If you connect a radio and the Ethernet LED does not light on the radio, there
may be a problem with the Ethernet cable. Verify that the cable is plugged into
the radio at one end, and to an Ethernet hub or a 10/100 Base-T Ethernet switch
at the other end.
Note: The RLXIB-IH2N-W radio auto-detects the Ethernet connection type, and does not require a
crossover cable for direct connection to a PC.
ProSoft Technology, Inc.
April 22, 2010
RLXIB-IH2N-W ♦ 802.11n
Weatherproof Dual Industrial Hotspot
Page 25 of 29