Other Connections - Telefunken TF-LED32S89T2S Instruction Manual

Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet. The RF
(S2) input is used for connecting a satellite
antenna.

Other connections

• Connect the video source to the
AV IN input using a RCA cable.
• Plug the power cable in the electric outlet,
making sure the current voltage is supported.
• If the video source has a HDMI output
jack, you can connect the signal to the monitor
by the HDMI cable (not included).
• Optical output is intended for transmitting
multi-channel sound to an external decoder
(e.g. in 5.1-CH format). Optical cable should
be used for connection (not included).
• When using the TV as a computer
monitor, connect the PC to the VGA input on
the unit with a VGA cable (not included).
Before you start
• PC audio input is used for
transmitting audio signal from a computer to the
TV.
• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.
• PCMCIA slot is used for CI (CAM)
modules that are obtained from your digital
TV provider.
• RJ45 Ethernet port is used for connecting
the TV to the Internet using the Ethernet cable
(not included).
5
5