Child Mode; Reconnecting To The Internet; Adding Account; Updating Firmware - Telefunken TF-LED32S89T2S Instruction Manual

Operation

Child Mode

1. On the TV's Home screen,
press
Settings section and select Parental
control.
2. Set an access code - without knowing
it, children will not be able to change
parental control settings themselves.
3. Select a filtering level in the search and
restrictions on the age rating.
The next time you try to open the Parental
Control menu, the TV will ask for the current
PIN code. If you forget it and enter it
incorrectly five times, the TV will prompt to
reset the code. Enter the master PIN 0000,
and then enter the new code.

Reconnecting to the Internet

If the TV was connected to the Internet
using a cable, disconnect it and
reconnect.
To reconnect the TV to Wi-Fi:
1. Remove the cable from the LAN
connector if you are connected to the
Internet through it.
2. On the TV Home screen, press
and select Network.
3. If you want to reconnect the TV to
a network that has a password
changed, first delete it. To do this,
select a network in the list of
available networks and click Delete
this network.
4. In the list of available networks, find
the one you need and enter the
password for it.

Other settings

For other TV settings, see the website
yandex.ru/support/smart-tv.
14
, then go to the Device

Adding account

If you use the TV with your family, add their
accounts to the TV. You can switch between
accounts: the browsing history will not be
mixed, so the recommendations of films, TV
channels and videos for each family member
will be more accurate.
To add an account, on the home screen
press , select Add user and follow the
instructions on the TV. The added account
will automatically become active -
recommendations will be selected taking
into account the preferences of the owner,
his Plus or KinoPoisk subscription will also be
used.
If you don't need an account on the TV
anymore, log out: on the TV's home screen
press , select an account and press Log
out.

Updating firmware

The TV automatically checks for updates and
installs them. If you want to see the current
firmware version or force update it:
1. On the TV's Home screen,
press , then go to the Device
Settings section.
2. Select About the Device. The current
firmware version is displayed in the
Build item. To update the firmware,
click System Update.

Settings reset

On the TV's Home screen, press
go to the Device Settings section and select
Storage and Reset. Press Factory settings,
confirm the operation and wait until the reset is
completed. Then reconfigure the TV.
, then