Adjust Steering Levers - Gravely ZT X Operator's Manual

Figure 32
Models 915255, 915256, 915257
See Figure 33.
1. Tip seat forward.
2. Loosen the two wing knobs located at the
front of the seat plate.
3. Adjust seat to desired position.
4. Tighten wing knobs.
Figure 33
5. Return seat to operating position.

ADJUST STEERING LEVERS

Adjust Steering Lever Height
See Figure 34.
1. Remove hardware securing steering
lever to upper control arm.
2. Place steering lever in desired adjusting
hole.
• Use upper and middle holes for highest
lever position.
• Use middle and lower holes for lowest
lever position.
3. Reinstall hardware in upper control arm.
4. Align levers side to side. See Adjust
Steering Level Reach on page 26.
5. Fully tighten hardware.
2
1. Adjusting Hole
2. Mounting Hole
3. Steering Lever
4. Upper Control Arm
EN - 25
3
1
Figure 34
4