Gravely ZT X Operator's Manual page 28

See Figure 35.
6. Loosen lock nut on height-adjustment
bolt.
7. Turn bolt in or out until levers are at the
same height.
8. Tighten lock nut.
1
1. Lock Nut
2. Height-adjuster Bolt
Figure 35
Adjust Steering Level Reach
See Figure 36.
1. Loosen hardware securing steering lever
2. Pivot steering lever to desired position.
3. Ensure levers are aligned with each
4. Tighten hardware.
2
1. Steering Lever
2. Upper Control Arm
3. Hardware
EN - 26
to upper control arm.
other.
2
Figure 36
1
3